Handling a Sudden Hot Water System Failure: Key Actions

This Page

In this article in the next paragraph you can discover additional exceptional guidance pertaining to What Would Cause My Electric Water Heater to Stop Working?.


Hot Water Heater Repair
Numerous modern homes make use of an electric hot water heater for their heater, because of its comfort as well as ease of use. However, similar to any other electric home appliances, issues may arise with its usage, all of a sudden. It can be truly aggravating to wake up to a cool shower rather than a hot one or having your bathroom with water that isn't warm enough and even as well hot. Whatever the case might be, hot water heater issues can be quite stressful. Fortunately, we have actually made a listing of possible solutions to your hot water heater problems. There are a variety of factors that might create many of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you turn off the main power supply for security. Whatever the trouble is, getting it taken care of need to not present too much of a concern if you follow these actions:

Call A Professional:


If after changing all malfunctioning parts and resetting your temperature level, the water heater still isn't functioning, you might need to speak to a specialist plumber for an expert opinion. The trouble with your heater could be that the cold and hot taps have actually been switched or it might be undersized for the quantity of hot water required in your home. Whatever the situation might be, an expert plumber would certainly help fix the problem.

Inspect Your Power Supply:


As standard as this might seem, it is extremely essential. Without appropriate power, your hot water heater will not work. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once again. Change any kind of busted or worn-out fuse. Evaluate the appliance with power after these changes to see if it's currently functioning.

Examine Your Thermostat:


If your hot water heater still isn't working or the water coming out isn't hot enough, you may require to examine the temperature settings on your upper thermostat. Guarantee the breaker is turned off prior to doing anything. Open the gain access to panel and also press the red button for temperature reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on and check if the issue has been solved.

Examine the Burner in the Hot Water Heater:


If it's not a power trouble, after that attempt checking out your heating element if it is still functioning. Examine each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that part and then inspect whether the warm water is back on.

Verdict


Water heater problems are not always significant. Many of them are because of small issues like a blown fuse or worn-out burner. Replacing the faulty components need to suffice. However, if you are still not able to address the issue, give a call to your nearest plumber to come to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


What Would Cause My Electric Water Heater to Stop Working?

I hope you enjoyed our section on No Hot Water — Water Heater Repair. Thanks a ton for spending some time to read our blog post. Don't hesitate to set aside a second to share this blog posting if you appreciated it. I cherish reading our article about Hot Water Heater Repair.


Top plumbers, call!

Leave a Reply

Your email address will not be published. Required fields are marked *